Used Vintage Mu-Tron Bi-Phase
Used Vintage Mu-Tron Bi-PhaseCondition: Good vintage condition. The unit shows some wear around the edges as well as some scratching on the faceplate. Mu-Tron external A and B switch included. The external switch works but the A switch is a little intermittent.
The Mu-Tron Bi-Phase consists of two independent 6-stage phasor circuits, two sweep generators (oscillators), and a number of unique additional controls to allow maximum flexibility in generating a variety of phasing effects. The Mu-Tron Bi-Phase also offers several convenience features including LED indicators on each phasor, mike stand socket on bottom of housing for above-the-floor mounting, and AC cord storage on back panel. The unit is furnished with a dual foot switch and has an optical photoelectric foot pedal and provision for synthesizer interface for external control of sweep. And, like all Mu-Tron products, the Mu-Tron Bi-Phase and its accessories are solidly constructed to withstand the most severe professional use.
Controls:Sweep Generator 1
Rate controls the speed/rate of the LFO wave that controls the effect
Man/Ped switches the rate of the LFO between the setting of the Rate knob and the pedal.
Shape switches the LFO between a square and a sine wave
Sweep Generator 2
Rate controls the speed/rate of the LFO wave that controls the effect
Shape switches the LFO between a square and a sine wave
Phasor A
Depth controls the depth/amplitude of the modulation (the size of the range in which the effect sweeps)
Feedback sets the amount of effected signal fed back into the effect (for a stronger effect)
Sweep (Ped/Gen 1) switches the sweep control of the phasor between pedal control and LFO control by Sweep Generator 1
Phasor B
Depth controls the depth/amplitude of the modulation (the size of the range in which the effect sweeps)
Feedback sets the amount of effected signal fed back into the effect (for a stronger effect)
Sweep Sync (Norm/Rev)switches between normal sweep and reverse sweep (if you use the same sweep source as phasor A, phasor B will move in the opposite direction)
Sweep (Gen 1/Gen 2/Ped) switches the sweep control of the phasor between pedal control, LFO control by Sweep Generator 1 and LFO control by Sweep Generator 2
Phasor B Input selects a source for Phasor B: input A (same input as Phasor A), output A (Phasor B gets the output of Phasor A as input), input B (separate input for Phasor B)
The Mu-Tron Bi-Phase consists of two independent 6-stage phasor circuits, two sweep generators (oscillators), and a number of unique additional controls to allow maximum flexibility in generating a variety of phasing effects. The Mu-Tron Bi-Phase also offers several convenience features including LED indicators on each phasor, mike stand socket on bottom of housing for above-the-floor mounting, and AC cord storage on back panel. The unit is furnished with a dual foot switch and has an optical photoelectric foot pedal and provision for synthesizer interface for external control of sweep. And, like all Mu-Tron products, the Mu-Tron Bi-Phase and its accessories are solidly constructed to withstand the most severe professional use.
Controls:Sweep Generator 1
Rate controls the speed/rate of the LFO wave that controls the effect
Man/Ped switches the rate of the LFO between the setting of the Rate knob and the pedal.
Shape switches the LFO between a square and a sine wave
Sweep Generator 2
Rate controls the speed/rate of the LFO wave that controls the effect
Shape switches the LFO between a square and a sine wave
Phasor A
Depth controls the depth/amplitude of the modulation (the size of the range in which the effect sweeps)
Feedback sets the amount of effected signal fed back into the effect (for a stronger effect)
Sweep (Ped/Gen 1) switches the sweep control of the phasor between pedal control and LFO control by Sweep Generator 1
Phasor B
Depth controls the depth/amplitude of the modulation (the size of the range in which the effect sweeps)
Feedback sets the amount of effected signal fed back into the effect (for a stronger effect)
Sweep Sync (Norm/Rev)switches between normal sweep and reverse sweep (if you use the same sweep source as phasor A, phasor B will move in the opposite direction)
Sweep (Gen 1/Gen 2/Ped) switches the sweep control of the phasor between pedal control, LFO control by Sweep Generator 1 and LFO control by Sweep Generator 2
Phasor B Input selects a source for Phasor B: input A (same input as Phasor A), output A (Phasor B gets the output of Phasor A as input), input B (separate input for Phasor B)
Our customers are now welcome to visit the Brian's Guitars showroom without an appointment! Thank you for all of the patience and understanding over the past year.
Thank you all for your understanding and cooperation!