Used Two Rock Custom Reverb Artist Head

Used Two Rock Custom Reverb Artist Head
Custom Blue Tolex!Head Serial Number: ARTIST 018

Condition: Great shape for a nice, early Two Rock head. Shows a few light tolex scuffs on the head especially on the bottom edges.

50 Watt Custom Reverb Artist HeadTreble Control: Adjusts the high frequency response. In the full counter-clockwise position, high frequencies are bypassed to ground. In the full clockwise position, high frequencies are allowed to pass to the next gain stage.

Middle Control: Adjusts the mid-range response. In the full counter-clockwise positon, the tone will be somewhat “scooped” of mid-range response, emphasizing the highs and lows. In the full clockwise position, mid-range frequencies are allowed to pass to the next gain stage.

Bass Control: Adjusts the bass response. In the full counter-clockwise position, low frequencies are cut. In addition, the response of the treble and mid-range controls is greatly reduced. In the full clock- wise position, low frequencies are allowed to pass to the next gain stage.

Mid Switch: Boosts the mid range frequency response. 6. Deep Switch:Boosts the low and low-mid frequencies. This is a low frequency contour switch,

Input Gain: Adjusts the overall gain of the amplifier. Start with this control in the 12 o’clock position. Keep in mind that the amount of gain set here determines the signal level feeding the lead channel. Low gain settings of this control will require higher lead gain settings for the same amount of overdrive.

Clean Channel Master Volume: Adjusts the output level of the clean channel.

Bright Switch: Boosts the high frequency response. This is most effective when the input gain is set at 12 o’clock or lower. The effect is less dramatic as the input gain control is adjusted past the 12 o’clock position.

EQ1/EQ2: This switch allows you to choose between 2 completely different equalization settings. EQ1 is a lower gain setting, with extended midrange and bass available when used in conjunction with the middle and bass controls as well as the deep switch. This setting is suitable for any style requiring a pure clean tone with a nice round bottom and plenty of headroom. EQ2 is a higher gain setting, allowing a greater signal level to pass to the lead channel. This setting is suitable for any style requiring a clean to slightly distorted tone in clean mode, and more gain in the lead mode.

Lead Gain: Adjusts the input level (gain) of the lead channel.

Lead master: Adjusts the output level of the lead channel.

Lead Channel Switch: Sends the instrument signal through the lead circut, adding extra stages of gain to the signal and enabling the lead gain and lead master controls. To enable foot switch control of this function, switch must be in the down position.

Bypass Switch: This switch bypasses the tone controls, increasing both level and mid-range response. To enable footwitch control of this function, switch must be in the down position.

Reverb: Mixes the dry signal with a high quality spring-type reverberation effect. This effect is defeated with the control in the full counter-clockwise position.

Presence Control: Adjusts the contour of high-frequency response. The high-frequency response will increase as you advance the control clockwise.

Back Panel Features: Effects Loop, Feedback switch
Our customers are now welcome to visit the Brian's Guitars showroom without an appointment! Thank you for all of the patience and understanding over the past year.
Thank you all for your understanding and cooperation!

For E-mail inquiries:

Brian@briansguitars.com

graham@briansguitars.com

For phone inquiries:

1-877-726-0756

Stay updated at our social media pages:

You may also like

Recently viewed