Walrus Audio Fundamental Series Fuzz

Walrus Audio Fundamental Series Fuzz
For the Fundamental Series, we challenged ourselves to design a set of pedals with the tonal integrity that’s required to live on a professional’s pedalboard , but with simplified controls friendly enough for even the newest effect pedal users. Each Fundamental pedal has 3 sliders for tweaking the sound and a three - way switch for changing pedal modes. The result is a line of 8 pedals that will keep you covered from your first band practice all the way to a sold - out arena. Designed and assembled at Walrus Audio headquarters in OKC, OK.
Fundamental Fuzz
The Fundamental Fuzz is a 3 - mode aggressive fuzz pedal with a wide tonal range. It can live anywhere in your c hain: hit it with your favorite overdrive or push it into another crazy distortion.
Gain
– The Gain slider sets the amount of gain applied to your guitar signal passing through the fuzz circuit.
Tone
– The Tone slider controls the frequency response of the signal after distortion. Below center cuts highs and above center cuts lows.
Volume
– The Volume slider sets the overall output volume of the pedal. Slide Switch
– The slide switch allows you to change between 3 distinct different flavors of the p edal. Each position has different clipping modes or tone profiles.
Gate
- Lowers bias voltage in main fuzz section, creating a gated and starved sound. Note: Changing the bias lowers the overall level of the pedal compared to the other modes. With plenty of gain on tap, use the Volume slider to compensate.
Classic
- Screaming fuzz with an iconic mid scoop. Compressed and crunchy Mid+ - Adds mid boost to flatten out the tone stage. Compressed and full
Bypass Switch
– Turns the effect on and off.
Bypass LED
- Illuminated when the effect is engaged.
Trails Modes
– Hold down the stomp switch when applying power to the pedal.
Input Jack
- 1/4 inch cable from the instrument. Output Jack - 1/4 inch cable to amplifier.
9v Jack
– 9 - volt DC, Center Negative, 100mA min.